Cân nặng | 500 kg |
Kích thước | 30 × 20 × 30 cm |
PRODUCT FEATURES lSupport 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T lHot-pluggable SFP footprint lCompact RJ-45 connector assembly lRoHS compliant and lead-free lSingle +3.3V power supply l10 Gigabit Ethernet over Cat 6a cable lAmbient Operating temperature: 0°C to +60°C PRODUCT DESCRIPTION SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset. +3.3V Volt Electrical Power Interface The SFP+-10GBASE-Thas an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation. +3.3 Volt Electrical Power Interface Parameter Symbol Min Typ Max unit Notes/Conditions Supply Current Is 700 900 mA 3.0W max power over full range of voltage and temperature. See caution note below Input Voltage Vcc 3.13 3.3 3.47 V Referenced to GND Maximum Voltage Vmax 4 V Surge Current Isurge TBD mA Hot plug above steady state current.See caution note below Caution: Power consumption and surge current are higher than the specified values in the SFP MSA Outline drawing (mm) Label:SFP+