Cân nặng | 500 kg |
Kích thước | 30 × 20 × 30 cm |
1. Overview 10GBase-T to 10GBase-R Media Converter supports two types media for network connection suchas10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19”converter rack Chassis for use at a central wiring closet. 2. Technical Specifications Standards 1000Base-T, 2.5GBase-T, 5Gbase-T, 10Gbase-T 1000Base-X, 2500Base-X, 5GBase-R , 10GBase-R Media Supported 1000Base-T: Cat5 UTP/STP. MAX 100m; 2.5GBase-T: Cat5eUTP/STP. MAX 50m; 5GBase-T: Cat5eUTP/STP. MAX 50m; 10GBase-T: Cat6aUTP/STP. MAX 50m; Port Type RJ45, SFP Slot Work Mode 1000Base-T to 1000Base-X 2.5GBase-T to 2500Base-X 5Gbase-Tto 5GBase-R 10Gbase-Tto 10GBase-R Power Supply 12V DC Power consumption MAX 5W Operation Tempera tore 0?to 55? Relative Humidity 5% to 80% (non-condensation) 3. Installing the Converter For as a standalone unit: →Verify the DC adapter conforms to your countryDC power requirement and insert the power plug →Connect the media cable for network connection For as a slide-in unit: →The slide-in Media Converter and Converter Rack Chassis should supplied only from the same source, both Media Converter Rack Chassis are built to match each other at dimension, DC jack, DC receptacle and power safety. →Turn off the 19”converter rack power →Locate +12V DC power jack on converter back, carefully slide in and plug to 19”rack +12V DC power receptacle →Connect the media cable for network connection →Turn on the converter rack power, the Power LED will light up Wire connection, Front and Side panel Label:10G Media Converter